Barr Aquatic Systems

Magnetic Seahorse Feeder

Finally a way to feed your slow-eating seahorses. When you drop Mysis in the top they will slowly sink down the tube, and appear at the base of the unit at the feeding tray. It won't talk long for your horses to figure out that this beautiful item is a food dispenser, and they will hang out on the seahorse grips whenever they are hungry, keeping an eye out for new food.

The included magnets are strong enough to hold the feeder at any position on up to 1/2" thick material.

Available in multiple colors.

Size: 5" x 2.6" x 5.9 (125mm x 65mm x 150mm)

Introductory price: $29


Lifetime warrantee!

BAS will repair or replace any unit that is returned to us (no COD please) that is no longer functional, at no cost, as long as it has not be obviously abused (shipping not included).

Note:

Plastic items are printed in PETG, which is fully food and reef safe. The printing process is not perfect, and some visible defects (as shown in the pictures) may exist. Items may be available in select colors, please ask. Typically available:
  • Translucent Green
  • Translucent Blue
  • Translucent Red
  • Black
  • Yellow
  • Purple
  • Bubblegum Pink
Available with minimum order of $100 or more (when in stock):
  • Translucent Magenta
  • Translucent Orange
  • Translucent Yellow
  • Red
  • Green
  • Blue
  • Gray
  • White

Please allow additional time if you are requesting special colors or logos.

All magnets are N50 Neodymium Magnet (NdFeB Rare Earth), and are epoxy coated at the magnet factory for rust resistance. They are then encased in PETG plastic for extra protection. Use care with them, they are strong and can really jump. Keep away from pacemakers or children under 5 years old.

Extra strength magnets are available for an additional fee, please inquire.

Lifetime warranty on all 3D printed products.

Wholesale orders:

Wholeseale or reef club orders are welcome! Minimum order ammount is $250. With $500+ orders, free logo work is included to put your logo on each item. Logo artwork must be provided, and there are limitations on what will fit on the parts, and be legible. Simple, monochrome art works best.